Multiteria

Lead By Design

process banner

OUR PROCESS

We have a rigorous process that helps us understand you better so we can provide the most innovative, effective solutions to your challenges.

We listen ... and we learn ... so we can thoroughly understand your challenges. If the project is large and complex, we would be glad to recommend a highly qualified design consultants for you. If the project is fairly straightforward, we could collaborate with you and exchange ideas and identify possible solutions. We gather details, photos and dimensions of the space.

Slide 1
STEP 1
DISCOVERY PHASE
Image is not available
Image is not available
Image is not available
Image is not available
Image is not available
Image is not available
  1. We gather operational details to better understand your challenges and needs
  2. Depending on the size of your project, we can recommend a qualified design consultant
  3. If the scope has minimal impact on your space, we measure and obtain field dimensions
  4. These are combined with photographs and videos of the existing operation to provide an initial recommendation and overview of proposed improvements
Slide 1
Image is not available
STEP 2
CONCEPTUAL DESIGN PHASE
Image is not available
Image is not available
  1. We develop preliminary AutoCAD drawing(s) based on our discovery research
  2. These drawings include alternate design options to explore
  3. Traffic patterns and flow are also identified, along with key equipment selections
  4. Our support team walks you through the design, assuring you are comfortable with the design concepts
  5. Once finalized, we develop preliminary equipment cost and budget to ensure alignment with your allocations
Slide 1
Image is not available
STEP 3
DESIGN / DEVELOPMENT
Image is not available
Image is not available
  1. Finalization of AutoCAD and REVIT drawing plan views
  2. Development of detailed equipment elevations and counter sections to indicate specific equipment and dimensions
  3. Identify and accommodate all electrical and plumbing requirements
  4. List exterior finishes and color selections
  5. Revise equipment budget to reflect all final changes and adjustments
  6. If you have a design consultant, this information is thoroughly coordinated with them
Slide 1
Image is not available
STEP 4
PROJECT FINALIZATION
Image is not available
Image is not available
  1. Develop detailed item specifications for your consultant or purchasing department
  2. If needed, we can develop photo-realistic renderings should a higher level approval of project funding be required
  3. We will issue final design drawings suitable for bidding purposes
Slide 1
Image is not available
STEP 5
OPTIONAL INSTALLATION
Image is not available
Image is not available

Option 1: Install Supervision
Hire a local install team.
We send an Install Supervision Manager to oversee your contractor’s install.

Option 2: Full Install
Hire our union install team.
Your install is completed on-site with our team's knowledge of every bolt.
Fast-paced, no headaches, fewer labor hours, and end-to-end project confidence with a turn-key solution.

Slide 1
STEP 1
DISCOVERY PHASE
  1. We gather operational details to better understand your challenges and needs
  2. Depending on the size of your project, we can recommend a qualified design consultant
  3. If the scope has minimal impact on your space, we measure and obtain field dimensions
  4. These are combined with photographs and videos of the existing operation to provide an initial recommendation and overview of proposed improvements
Slide 1
STEP 2
CONCEPTUAL DESIGN PHASE
  1. We develop preliminary AutoCAD drawing(s) based on our discovery research
  2. These drawings include alternate design options to explore
  3. Traffic patterns and flow are also identified, along with key equipment selections
  4. Our support team walks you through the design, assuring you are comfortable with the design concepts
  5. Once finalized, we develop preliminary equipment cost and budget to ensure alignment with your allocations
Slide 1
STEP 3
DESIGN / DEVELOPMENT
  1. Finalization of AutoCAD and REVIT drawing plan views
  2. Development of detailed equipment elevations and counter sections to indicate specific equipment and dimensions
  3. Identify and accommodate all electrical and plumbing requirements
  4. List exterior finishes and color selections
  5. Revise equipment budget to reflect all final changes and adjustments
  6. If you have a design consultant, this information is thoroughly coordinated with them
Slide 1
STEP 4
PROJECT FINALIZATION
  1. Develop detailed item specifications for your consultant or purchasing department
  2. If needed, we can develop photo-realistic renderings should a higher level approval of project funding be required
  3. We will issue final design drawings suitable for bidding purposes

Ready to Start Your Process?

Multiteria is ready to help you out wherever you may be in your process.  Contact us today!

REQUEST CALLBACK